Electrolytic Capacitor — 1000µF 25V, Through-Hole (10-Pack)

A standard aluminum electrolytic capacitor in the 470-1000µF range used to stabilize the power supply feeding a servo or other current-hungry component. Placing one of these across the servo's power rails smooths out the current spikes a servo draws when it moves, which is exactly the practical lesson this part supports.

Highlights

• Capacitance: 1000µF
• Rated voltage: 25V
• Through-hole radial package, 10 x 17mm
• Fixed capacitor, standard operating temperature range
• Sold in a 10-piece pack

Typical Uses

Servo power-rail stabilization (reduces brownouts/resets when a servo draws a current spike), general power-supply filtering, and any breadboard build powering a motor or servo from the same rail as a microcontroller.

Compatibility

Platform-agnostic passive component; works in any 5V or lower DC circuit within its 25V rating. Observe polarity — electrolytic capacitors are polarized and must be installed the correct way round.

What's Included

10x 1000µF 25V aluminum electrolytic capacitors.

Notes

This is a polarized component: the longer lead is positive and the striped side is negative. Reversing polarity can damage the capacitor. Confirm your project's actual working voltage stays safely under the 25V rating.