0.96" I2C OLED Display Module — 128×64, White

285.00 ฿
Be the first to write a review
  • 128x64
  • I2C
  • White
  • Used in 9 projects
Buy 3 or more, save 10% — discount applied automatically at checkout

In stock

  • Free Shipping
  • 100% Genuine, Quality Guaranteed
  • Real Technical Support
  • Compatibility Checked
Color: Blue

Works with

ESP32-S3 development board showing its dual-core Xtensa LX7 chip, 8MB PSRAM/16MB Flash, Wi-Fi 4 + Bluetooth 5, dual USB-C ports, and up to 45 GPIO pins. ESP32-S3 Development Board — Wi-Fi & Bluetooth, 8MB PSRAM / 16MB Flash, USB-C ESP32-C3 SuperMini development board with two loose pin header strips, showing its single-core RISC-V chip, Wi-Fi 4 + Bluetooth 5, ~11-13 usable GPIO pins, and USB-C connector. ESP32-C3 SuperMini Development Board — Wi-Fi & Bluetooth, USB-C

Checked against real buyer feedback before it's listed

SKU: TML-DSP-0-96-I2C-OLED-DISPLAY-01

Give your project a real screen. A small OLED display turns a blinking LED project into something that actually tells you what is going on.

  • 128 by 64 pixels, plenty of room for readings, menus, or simple graphics
  • Simple 4-pin I2C wiring: VCC, GND, SDA, SCL
  • 3.3V compatible, works straight off your ESP32 or Arduino

Core to the Room Environment Monitor, Mini Weather Station, and OLED Sensor Dashboard builds. Check the controller chip on your specific unit before writing firmware, some 0.96 inch batches ship with a pin-compatible SSD1306 successor.

Specifications

Resolution 128x64
Interface I2C
Color White
Screen Size 0.96 inch

Used in these projects

Small enclosure with 0.96 inch OLED display and rotary encoder knob, ESP32-S3 and AHT20 sensor on breadboard

Build a Compact Sensor Dashboard

Intermediate

Small plastic project enclosure with a 0.96 inch OLED display showing home status icons, mounted near an entryway

Build a Home Status Display

Beginner

Breadboard demo with ESP32-C3 SuperMini, AHT20 sensor, OLED display showing target temperature, and a 40mm fan spinning

Build a Digital Thermostat Demo

Intermediate

Small enclosure with 0.96 inch OLED showing temperature and humidity, outdoors on a railing

Build a Mini Weather Station

Beginner

Breadboard reaction timer game with OLED display, push button, buzzer and ESP32-C3

Build a Reaction Timer Game

Beginner

Breadboard held outdoors with ESP32-C3 SuperMini, NEO-6M GPS module, and OLED display showing GPS coordinates

Build a GPS Location Display

Beginner

HC-SR04 ultrasonic sensor on a servo sweeping next to a small OLED radar display

Build an Ultrasonic Radar Display

Intermediate

Load cell bar with HX711 module and OLED weight readout on a kitchen counter

Build a Digital Kitchen Scale

Beginner

Digital compass and tilt display breadboard build with ESP32-C3 SuperMini, MPU6050 sensor, and OLED display showing heading

Build a Digital Compass & Tilt Display

Beginner

0.96" I2C OLED Display Module — 128×64, White
285.00 ฿

Customer reviews

No reviews yet. Be the first to share your thoughts.

Write a review

    You may also like