ESP32-C3 SuperMini Development Board — Wi-Fi & Bluetooth, USB-C

670.00 ฿
Be the first to write a review
  • ESP32-C3
  • Wi-Fi + Bluetooth
  • USB-C
  • Used in 24 projects
Buy 3 or more, save 10% — discount applied automatically at checkout

In stock

  • Free Shipping
  • 100% Genuine, Quality Guaranteed
  • Real Technical Support
  • Compatibility Checked

Works with

Seeed Grove Vision AI Module V2 with at-a-glance spec card showing onboard NPU, ESP32 compatibility, and pre-trained models Seeed Grove Vision AI Module V2 — Onboard NPU Vision Co-Processor 0.96" I2C OLED display module on a wood workbench surface, showing its 128x64 pixel resolution, I2C wiring (VCC/GND/SDA/SCL), and 3.3V ESP32/Arduino compatibility. 0.96" I2C OLED Display Module — 128×64, White AHT20 I2C temperature and humidity sensor module with key specs: ~±2% RH accuracy, I2C fixed address, no calibration, Arduino/CircuitPython support. AHT20 Temperature & Humidity Sensor Module — I2C HC-SR04 ultrasonic distance sensor module with key specs: 2cm–450cm range, ~0.3cm accuracy, trigger/echo interface, 3.3–5V logic. HC-SR04 Ultrasonic Distance Sensor Module MPU6050 6-axis accelerometer and gyroscope module with at-a-glance spec card showing I2C interface and real-time tilt/motion detection MPU6050 6-Axis Accelerometer & Gyroscope Module

Checked against real buyer feedback before it's listed

SKU: TML-BRD-ESP32-C3-SUPERMINI-01

This is the board most builds in our lineup start with, small, capable, and ready to connect the moment you plug it in.

  • Wi-Fi 4 and Bluetooth 5 on a single-core RISC-V chip, so your project is online without a separate module
  • Around 11 to 13 usable GPIO pins, enough for a sensor, a display, or both
  • USB-C for programming and power, no obscure driver hunting
  • Same toolchain as our ESP32-S3 board, so nothing changes if you upgrade later

Our default controller recommendation, from the Room Environment Monitor to the Motion-Activated Desk Light.

Specifications

Chipset ESP32-C3
Wireless Wi-Fi + Bluetooth
Connector USB-C

Used in these projects

Small plastic project enclosure with AHT20 sensor and ESP32-C3 breadboard, on a windowsill

Build a Room Temperature & Humidity Monitor

Beginner

WS2812B LED strip glowing warm on a desk edge, wired to PIR sensor and ESP32-C3 on a breadboard

Build a Motion-Activated Desk Light

Beginner

Small enclosure and breadboard with ESP32-C3, AHT20, SD card module and DS3231 RTC, laptop showing logged data graph

Build a Wireless Environmental Data Logger

Intermediate

ESP32-C3 SuperMini and buck converter on a breadboard driving a glowing WS2812B RGB LED strip, controlled from a phone color-picker app

Build a Bluetooth Phone-Controlled LED

Intermediate

ESP32-C3 SuperMini breadboard build with an SG90 micro servo pointing to a printed scale, controlled by a 10K potentiometer

Build a Servo Position Controller

Beginner

Small plastic project enclosure with a 0.96 inch OLED display showing home status icons, mounted near an entryway

Build a Home Status Display

Beginner

Breadboard with five individual LEDs lit in a dice-face pattern and a push button, ESP32-C3 SuperMini, game night table

Build an Electronic Dice

Beginner

Breadboard demo with ESP32-C3 SuperMini, AHT20 sensor, OLED display showing target temperature, and a 40mm fan spinning

Build a Digital Thermostat Demo

Intermediate

Capacitive soil moisture probe in a potted plant wired to a small enclosure on a windowsill

Build a Smart Plant Monitor

Beginner

Small enclosure with 0.96 inch OLED showing temperature and humidity, outdoors on a railing

Build a Mini Weather Station

Beginner

Tidy breadboard with LEDs, potentiometer, push button, buzzer and ESP32-C3, notebook with circuit sketches

Electronics Starter Lab — Learn the Fundamentals

Beginner

Breadboard with HC-SR04 ultrasonic sensor, buzzer and ESP32-C3 mounted near a doorway

Build a Distance Warning System

Beginner

Breadboard reaction timer game with OLED display, push button, buzzer and ESP32-C3

Build a Reaction Timer Game

Beginner

Breadboard SD card data logger with AHT20 sensor, SD card module and RTC module, outdoors on a rock

Build an SD Card Data Logger

Beginner

Breadboard held outdoors with ESP32-C3 SuperMini, NEO-6M GPS module, and OLED display showing GPS coordinates

Build a GPS Location Display

Beginner

Breadboard with ESP32-C3 SuperMini, RC522 RFID reader module and buzzer, hand tapping an RFID card near a door

Build an RFID Access Demo

Beginner

Breadboard power current monitor with INA219 sensor wired to a small DC cooling fan

Build a Power & Current Monitor

Intermediate

Load cell bar with HX711 module and OLED weight readout on a kitchen counter

Build a Digital Kitchen Scale

Beginner

Breadboard ultrasonic theremin build with ESP32-C3 SuperMini, HC-SR04 ultrasonic sensor, and buzzer, hand hovering over sensor

Build an Ultrasonic Theremin

Beginner

Digital compass and tilt display breadboard build with ESP32-C3 SuperMini, MPU6050 sensor, and OLED display showing heading

Build a Digital Compass & Tilt Display

Beginner

Capacitive touch piano breadboard build with ESP32-C3 SuperMini, TTP223 touch sensor modules as keys, and buzzer

Build a Capacitive Touch Piano

Beginner

Grove Vision AI starter kit with ESP32-C3 SuperMini, Seeed Grove Vision AI Module V2 camera, and OLED display

Build a Grove Vision AI Starter

Intermediate

Wake-word voice command recognizer breadboard build with ESP32-C3 SuperMini and INMP441 I2S microphone module

Build a Wake-Word Voice Command Recognizer

Advanced

TinyML motion classifier with ESP32-C3 SuperMini and MPU6050 sensor strapped to a wrist, showing motion classification

Build a TinyML Motion Classifier

Advanced

ESP32-C3 SuperMini Development Board — Wi-Fi & Bluetooth, USB-C
670.00 ฿

Customer reviews

No reviews yet. Be the first to share your thoughts.

Write a review

    You may also like