Products

109 products

NEO-6M GPS module with ceramic patch antenna and at-a-glance spec card showing UART interface and satellite positioning

NEO-6M GPS Module — UART, with Ceramic Antenna

From 205.00 ฿
  • GPS
  • Used in 1 project
Choose options
Yellow and black non-contact infrared thermometer gun with an LCD readout showing 34.3 degrees Celsius, labeled with its at-a-glance specs.

Non-Contact Infrared Thermometer — Handheld IR Gun

720.00 ฿
Assortment of TO-92 package BC-series NPN/PNP transistors (BC547, BC548, BC549, BC550) laid out on a wood surface.

NPN/PNP Transistor Kit — BC-Series, Choose Your Type

From 230.00 ฿
  • Used in 1 project
Choose options
NRF24L01+PA+LNA wireless module with a long-range external antenna and 3.3V regulated adapter board, labeled with its at-a-glance specs.

NRF24L01+PA+LNA Wireless Module — 2.4GHz, Long Range

395.00 ฿
  • RF
9042 passive piezo buzzer, 5-pack

Passive Buzzer — 9042 Piezo Element for PWM Tone Generation (5-Pack)

63.00 ฿
PCB clamp and helping-hands soldering station with padded height-adjustable jaws holding a green circuit board, two flexible gooseneck arms with alligator clips, and a built-in soldering iron holder coil, labeled with its at-a-glance specs.

PCB Clamp & Helping-Hands Soldering Station — Dual Arm with Iron Rest

1,320.00 ฿
Photoresistor (LDR) analog sensor module with LM393 comparator and sensitivity trim potentiometer

Photoresistor (LDR) Sensor Module — Analog Voltage Output, LM393

52.00 ฿
PIR motion sensor module with white dome lens showing key specs: PIR trigger, digital HIGH output, adjustable sensitivity and delay, 5V logic.

PIR Motion Sensor Module — Adjustable Sensitivity & Delay

From 85.00 ฿
  • Used in 2 projects
Choose options
LUBATOOL precision deburring knife with a metal locking swivel-blade handle and a full set of replacement blades, labeled with its at-a-glance specs.

Precision Deburring Knife Set — Swivel Blade, LUBATOOL

1,005.00 ฿
Open JAKEMY JM-8183 145-in-1 precision screwdriver set case with at-a-glance spec card showing CR-V steel magnetic bits and Hex/Phillips/Pozidriv/Torx heads

Precision Screwdriver Set — 145-in-1, JAKEMY JM-8183

3,485.00 ฿
Rain sensor module with separate driver board and nickel-plated conductive rain plate, labeled with its at-a-glance specs: analog and digital output, adjustable sensitivity, irrigation and weather-station use.

Rain Sensor Module — Analog Raindrop Detection

119.00 ฿
Genuine Raspberry Pi 5 board with at-a-glance spec card showing quad-core Cortex-A76 CPU and full Raspberry Pi OS support

Raspberry Pi 5 — Genuine, Quad-Core Linux SBC

From 2,997.00 ฿
  • Used in 1 project
Choose options
Raspberry Pi Pico RP2040 development board with at-a-glance spec card showing 26 GPIO pins and dual-core processor

Raspberry Pi Pico — RP2040, Dual-Core, Wired

From 243.00 ฿
Choose options
RC522 RFID reader kit with card and keyfob, with at-a-glance spec card showing MFRC-522 chip and SPI interface

RC522 RFID Reader Kit — with Card & Keyfob

305.00 ฿
  • RFID/NFC
  • Used in 1 project
Choose options
Real Robotics 3-in-1

Real Robotics 3-in-1

350.00 ฿
Loose 1/4W metal film resistors from the 30-value, 10-ohm to 1-megaohm assortment kit.

Resistor Assortment Kit — 30 Values, 1/4W

From 190.00 ฿
  • Used in 2 projects
Choose options
5mm common-cathode RGB LED discrete through-hole component, 4-pin

RGB LED — 5mm Common Cathode, Discrete 4-Pin (100-Pack)

296.00 ฿
Spool of JCD-brand rosin-core solder wire, labeled with its at-a-glance specs: 60/40 tin-lead alloy, 2.0% flux core, 0.6-1.5mm diameters, 20g or 50g rolls.

Rosin-Core Solder Wire — 60/40, JCD

95.00 ฿
A rotary encoder module with a 360-degree rotating knob, shown on a wooden surface alongside its black plastic replacement knob cap. The main module features a silver metal rotary switch on a black PCB with blue accents, and two text overlays provide product specifications.

Rotary Encoder Module — 360°, with Knob

From 27.00 ฿
  • Used in 1 project
Choose options
Seeed Grove Vision AI Module V2 with at-a-glance spec card showing onboard NPU, ESP32 compatibility, and pre-trained models

Seeed Grove Vision AI Module V2 — Onboard NPU Vision Co-Processor

1,114.00 ฿
  • Camera
  • Used in 1 project
Choose options
Seeed XIAO ESP32S3 Sense board with camera module and at-a-glance spec card showing onboard camera, I2S mic, and TinyML capability

Seeed XIAO ESP32S3 Sense — Camera + Mic AI Dev Board

From 939.00 ฿
  • Audio
  • Bluetooth
  • Camera
  • Wi-Fi
  • Used in 1 project
Choose options
SG90 micro servo motor with 3-pin cable and at-a-glance spec card showing 9g weight and 180-degree rotation

SG90 Micro Servo Motor — 9g, 180°

From 178.00 ฿
  • Used in 2 projects
Choose options
Sipeed MaixCAM Pro RISC-V AI vision board with at-a-glance spec card showing NPU, embedded Linux, and onboard camera/screen/audio

Sipeed MaixCAM Pro — RISC-V Edge AI Vision Board with NPU

4,462.00 ฿
  • Audio
  • Camera
  • Used in 1 project
Open tin of solder flux paste, labeled with its at-a-glance specs: no-clean rosin flux, lead-free and RoHS-certified, prevents cold or balled-up solder joints on fine-pitch work.

Solder Flux Paste — No-Clean Rosin Flux

331.00 ฿