Products

109 products

BH1750 ambient light sensor module (GY-302) with a black integrated circuit on a blue PCB, next to five 2-pin header pins, labeled with its at-a-glance specs: I2C interface, direct digital lux output, 3-5V.

BH1750 Ambient Light Sensor Module — I2C

80.00 ฿
BMP280 barometric pressure sensor module on a purple PCB with a metal-can sensor, labeled with its at-a-glance specs: I2C or SPI interface, pressure and temperature readings, 3.3V/5V variants.

BMP280 Barometric Pressure Sensor Module — I2C/SPI

125.00 ฿
MB102 breadboard power supply module with USB port and DC barrel jack, labeled with its at-a-glance specs: switchable 3.3V/5V output, clips directly onto breadboard rails.

Breadboard Power Supply Module — 3.3V/5V, MB102

165.00 ฿
Breakable 2.54mm pitch pin header strips, available in male and female styles, shown fanned out on a wood surface.

Breakable Pin Header Kit — 2.54mm, Male & Female

From 129.00 ฿
  • Used in 1 project
Choose options
Capacitive soil moisture sensor probe with key specs: capacitive sensing, corrosion-resistant, analog output, 3.3–5V compatible.

Capacitive Soil Moisture Sensor Module

From 190.00 ฿
  • Used in 1 project
Choose options
Continuity tester box with binding-post terminals, a probe lead pair, and an alligator-clip lead pair, labeled with its at-a-glance specs.

Continuity Tester Box — with Probe & Alligator Clip Leads

1,015.00 ฿
Metal-body desoldering pump with heat-resistant white nozzle, labeled with its at-a-glance specs: spring-loaded vacuum action, reusable aluminum body, removes excess solder from joints.

Desoldering Pump — Solder Sucker, Metal Body

210.00 ฿
DHT22 AM2302 digital temperature and humidity sensor module with attached cable

DHT22 Temperature & Humidity Sensor — Digital Single-Bus (AM2302)

145.00 ฿
Digital calipers with LCD readout and at-a-glance spec card showing 0-150mm range and 0.01mm resolution

Digital Calipers — 0-150mm, LCD Display

1,950.00 ฿
Digital multimeter (DT-830B) measuring DC/AC voltage, current, resistance, and continuity, shown with its key specs.

Digital Multimeter — DC/AC Voltage, Current & Continuity

300.00 ฿
Choose options
DS32321 Real-Time Clock Module on a wooden surface, featuring a blue PCB with a black RTC battery holder and silver pins, with text overlays detailing specifications.

DS3231 Real-Time Clock Module — Battery-Backed

149.00 ฿
  • Used in 2 projects
Choose options
1000uF 25V aluminum electrolytic capacitor, through-hole, 10-pack

Electrolytic Capacitor — 1000µF 25V, Through-Hole (10-Pack)

94.00 ฿
Black 100×60×25mm ABS plastic two-piece project enclosure box, closed.

Electronic Project Enclosure — 100×60×25mm

89.00 ฿
  • Used in 6 projects
Choose options
ESD anti-static bench mat kit with grounding wire and wrist strap, labeled with its at-a-glance specs.

ESD Anti-Static Bench Mat — with Grounding Wire & Wrist Strap

671.00 ฿
ESPLB brand ESD-safe precision tweezers pair, one straight tip and one curved tip, labeled with its at-a-glance specs.

ESD-Safe Precision Tweezers — Straight & Curved Tips

285.00 ฿
ESP32 Builder Kit: all ten example projects you can build, from a touch piano to a weather station and home status display (illustrative images)

ESP32 Builder Kit

3,054.00 ฿
ESP32 Beginner Kit: twelve example projects you can build, from a digital kitchen scale to a GPS display (illustrative images)

ESP32 Explorer Kit

4,790.00 ฿
ESP32 Master Kit: twelve of its example projects, from a motion-activated desk light to an ultrasonic radar display (illustrative images)

ESP32 Master Kit

4,990.00 ฿
ESP32 Starter Kit: all five example projects you can build - ultrasonic theremin, touch piano, compass and tilt display, distance warning system and reaction timer game (illustrative images)

ESP32 Starter Kit

2,210.00 ฿
ESP32-C3 SuperMini development board with two loose pin header strips, showing its single-core RISC-V chip, Wi-Fi 4 + Bluetooth 5, ~11-13 usable GPIO pins, and USB-C connector.

ESP32-C3 SuperMini Development Board — Wi-Fi & Bluetooth, USB-C

670.00 ฿
  • Bluetooth
  • Wi-Fi
  • Used in 24 projects
ESP32-S3 development board showing its dual-core Xtensa LX7 chip, 8MB PSRAM/16MB Flash, Wi-Fi 4 + Bluetooth 5, dual USB-C ports, and up to 45 GPIO pins.

ESP32-S3 Development Board — Wi-Fi & Bluetooth, 8MB PSRAM / 16MB Flash, USB-C

360.00 ฿
  • Bluetooth
  • Wi-Fi
  • Used in 6 projects
IR flame sensor module with LM393 comparator and IR receiver, labeled with its at-a-glance specs: infrared flame detection up to about 1 meter, adjustable digital output, 4-pin connector.

Flame Sensor Module — IR Flame Detector

50.00 ฿
Flush diagonal cutters with blue handles and an angled black steel jaw, labeled with its at-a-glance specs.

Flush Diagonal Cutters — Precision Wire Cutter

1,317.00 ฿
Freenove ESP32-S3 Camera Board Kit on a wooden surface, featuring a black PCB with a camera module, USB-C ports, and a white connector, with text overlays detailing specifications.

Freenove ESP32-S3 Camera Board Kit — OV2640-Class

From 1,060.00 ฿
  • Bluetooth
  • Camera
  • Wi-Fi
  • Used in 2 projects
Choose options